Welcome: TASEI RFID CO.,LIMITED
Language: Chinese ∷  English

UHF R2000 one antenna module

  • UHF R2000 one channel module
UHF R2000 one channel module

UHF R2000 one channel module

  • Model :TS-311M
  • Chip:Impinj R2000
  • Protocol:ISO18000-6C and 6B
  • Product description: rfid R2000 one channel module
  • INQUIRY

Introduction:


TS-311M is a high performance one-channel module based on Impinj Indy R2000 chip

*Using Impinj INDY R2000 RF chip

*24hoursx365 days non-stop

*Peak Inventory Speed: 700 tags/s.

*Unique I-Search multi-tag recognition algorithm

*EPC C1 G2 and ISO 18000-6B protocols are both supported.

*Low power design, peak current is only 1.2A at 30dBm output power

*Antenna protection function, reminding the user when the antenna is not connected (can be turned off)



Specification


Working Environment

Operating Temp

-20°C to 55°C

Storage Temp

-20°C to 85°C

Humidity

95%(+55°C)

Parameter

Protocol

ISO 18000-6C(EPC gen2)

ISO 18000-6B

Frequency Range

902MHz~928MHz or 865MHz~868MHz or customize others frequency according to your needs

Working Voltage

3.7V-5V

Standby current

<50mA (EN high level)

Sleep Current

<100uA (EN low level)

Operating Current

1.2A +/-10%

Output Power

0-33dbm

Output Power Precision

+/- 1dB

Output Power Flatness

+/- 0.2dB

Data interface

RS232 and TCP/IP

Receive Sensitivity

< -85 dBm

Peak Inventory Speed

>700 tags/sec

Tag Buffer Capacity

1000 tags @ 96 bit EPC

Tag RSSI

Supported

Antenna Detector

Supported

Ambient Temp Monitor

Supported

Working Mode

Single/DRM

GPIO

2 inputs optical coupling  2 outputs optical coupling

Max Baud Rate

115200 bps

Heat Dissipation

Air cooling

Working Regions

US, Canada and other regions following U.S. FCC

Europe and other regions following ETSI EN 302 208 with & without LBT regulations

Mainland China

Japan

Korea

Malaysia

Taiwan

 

 

 

 

Note

 When the ambient temperature measurement function measured temperature exceeds 60 °C, device should not be working at full capacity.

 Please connect the heat sink if it continuous operation at full load.

 Supply voltage must not exceed 5V, or it will damage to the internal protection circuit.

 Set RF output power bigger than 30dBm need to be cautious, the peak current and temperature rise will be significantly increased.




Module Review:


Module Type

TS-311M

RF Channel

One channel

RF Connector

MMCX

Antenna Connection Mode

Single antenna

Interface Connector

Molex53261-1571

RF Connectors Material

Brass gold plated

PCB Material

Rogers FR4 gold-plated

Shield Material

Aluminum